ValueCAN3
Dual Channel Isolated Dual Wire CAN to USB InterfaceSpecifications
- ISO11898 dual wire CAN Physical Layer (TJA1040x2) compatible with Device Net and
CANOpen - J2534 Compliant for CAN and ISO15765
- RP1210 Compliant for CAN and J1939
- CCP protocol hardware acceleration
- Supports listen-only operations
- Double-buffered CAN transmission
- Industry standard 9-pin D-sub connector pinout
- Integrated 1 meter USB cable
- Transient and reverse battery protected
- Green and red LEDs indicate transmission or reception of USB data
- LED indicates transceiver power
- Operating temperature range: -40° C to +70°C
- Fully USB-powered with option for external power
- Input from 6-40V DC; compatible with 24V industrial systems
- Isolated transceiver side
- Power Consumption: 15mA @ 14.4 VDC (typical); 100mA @ 14.4 VDC (maximum during bus
fault) - On board Processing: 40 MIPS RISC-based design
- 64-bit time stamping to an accuracy of 0.5 microseconds for one channel or 5 microseconds for two channels; timestamp never overflows
- Windows XP / Vista / 7 / 8.X / 10 and Linux drivers
- Field-upgradeable flash firmware
- Vehicle Spy Trial included for baud rate setup
- Graphical Bit Timing Tool
- One year limited warranty
- Weight: 3.125 oz (87g)
* Specifications subject to change. Please contact Intrepid for the latest information.